China Analogue Dow Corning 57 Additive with Excellent Versatility.

Product Name: Leveling Agent

Item No.: SilibaseCPIK-57

Nonreactive silicone glycol copolymer surfactant supplied at 100 percent active concentration

Chinese factory produce Excellent substrate wettability Similar to Dow Corning 57 Additive.

SilibaseCPIK-57 is a polyether silicone modified surfactant, which strongly reduces the surface tension, resulting in excellent substrate wetting and leveling, good compatibility with various resins, suitable for water-based coatings, printing inks, UV masks In light varnishes, it has excellent substrate wetting, anti-cratering properties, unstable foam, and does not affect recoating at low dosage.

Good Compatibility Modified Surfactant Replacement product for Dow Corning 57 Additive.

● Provides slip, gloss enhancement,pigment treatment and leveling for ink and coatings applications

● Provides mar resistance for coatings applications

●Compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems

● Does not contaminate

● Recoatable when used as directed

Component: Polyether modified silicone polymer

Appearance: Transparent liquid

Specific gravity: 1.05±0.05

Active ingredient (%) :100%

Silibase Silicone produce SilibaseCPIK-57 Leveling Agent performance comparable to Dow Corning 57 Additive.Excellent substrate wettability, anti-shrinkage, excellent versatility, used in water-based, printing inks and UV light curing systems to greatly improve leveling and gloss. Surface slippery, effectively increase the hardness of the coating , can effectively reduce soft scratches, endow the coating film with permanent smoothness and anti-scratch performance, prevent adhesion, endow the paint film with excellent fullness, effectively improve the dispersion of pigments and fillers, improve the uniformity of color, and not May reduce intercoat adhesion during recoating.

SilibaseCPIK-57 has excellent substrate wetting and leveling Substitute for Dow Corning 57 Additive.

Water-based coatings, printing inks, varnishes, UV coatings and inks, etc.

To improve leveling

To reduce coefficient of friction

To improve mar resistance

To enhance gloss

To aid in pigment dispersing

SilibaseCPIK-57 Additive is effective at low concentrations. The amount required depends on the type of formulation, the solvent it contains, resin system and total system solids.

SilibaseCPIK-57 Additive is generally effective at concentrations typically ranging from 0.05-1.0 weight percent, based upon total formulation. This additive can be added during the grind or let-down, or can be post-added.

Characteristics may vary when used with different systems and formulations.

SilibaseCPIK-57 Additive is compatible with acrylic, alkyd, amide, epoxy, nitrocellulose, phenolic, polyester, polyurethane and vinyl systems. Thorough preproduction testing is necessary to ensure expected performance.

It can be added at any stage in the production process, generally 0.05%-0.8% by weight of the coating. Users are advised to conduct experiments to determine the optimal dosage before use.

To prevent the product from polymerization and gelling, please keep it sealed and away from heat and light. Recommended storage temperature is not higher than 30℃. Unused products must be sealed and stored in a timely manner and cannot be stored in the open. Safe storage time is 6 months at room temperature( 25℃) and under ventilation. 25KG/barrel

Tips: SilibaseCPIK-57 especially has good compatibility in various inks, strong anti- cratering performance, good leveling and good soft touch skin feel.

Note: Technical data represents typical values only. In view of the differences in formulas, production process, conditions, all the above statements must be adjusted according to the actual situation, our company does not make any promises. Our company reserves the right to reform its products without prior notice of any changes.